Packaging Type
10 kg. and 17.5 kg
Definition
Water-based, acrylic copolymer binder based, decorative, matt, interior ceiling paint.
Color
White
Places of Use
It can be used safely on interior ceiling surfaces such as all kinds of plaster and plaster.
Properties
It is a water-based, odorless, odorless, breathable, matt white, interior ceiling paint with high covering power, which can be applied on all kinds of plaster, plaster, etc. surfaces.
Technical Specifications
Binder Type: Acrylic copolymer
Viscosity (KU) (25 °C): 134 ± 3
Density (g/ml) (20 °C): 1.80± 0.03
Solids (wt) (%): 73 ± 2
Brightness (85° -Gloss): 7 ± 3
pH: 8.00-9.00
Coating Capacity (Theoretical): 15 m²/lt 9 m²/kg
(30µ dry film thickness):
Coating Capacity (Practical): 0.070 - 0.090 It /m² (single coat) 0.120-0.150 kg/m² (single coat)
Recommended number of floors: Two coats
Drying Time (20 °C): Drying: 2-3 hours, Complete Drying: 24 hours
Thinning Rate: 20% (with water)
Application 1
Application surfaces must be sound, dry and clean. Dirty, dusty, blistered and old painted surfaces should be scraped clean and surface defects should be corrected with Interior Putty.
Application 2
2-3 hours after primer application; Polipaint Ceiling is thinned with 20% water and applied in two coats with a brush or roller. Wait 1-3 hours between coats.
Storage Conditions
It can be stored in its original packaging in 5-35 °C environments away from direct sunlight. Protect from extreme temperature, humidity and frost.
Important Warnings
The paint must be thoroughly mixed before use. Ambient temperature should be between 5-35 °C during application. After each application; brush or roller should be cleaned with water. Polipaint Ceiling applied surfaces should be protected from physical and chemical factors for 3 days. Paint should never be discharged into sewage and water channels. Application should be done as stated above
Prev Page
