Packaging Type
12 lt.
Description
Acrylic emulsion based primer for exposed concrete surfaces, walls and ceilings to increase the adherence of gypsum and cement based liquids to the surface.
Color
Green
Places of Use
It is applied on walls, columns and ceilings before gypsum and cement based plaster applications.
Properties
It is an easy-to-apply primer that increases the adherence of cement and gypsum based plaster mortars to exposed concrete surfaces, prevents rapid water loss of these materials and extends the working time.
Technical Specifications
Binder Type: Acrylic copolymer
Viscosity (KU) (25 °C): 135 ± 5 (thinning with 10% water)
Density (g/ml) (20 °C): 1.52 ± 0.03
Solids (wt) (%): 78 ± 2
pH: 8.00-9.00
Application Thickness: Max. 0.4 mm
Area that can be primed: Depending on the surface, 4-7 m² area can be primed with 1 kg in a single coat.
Drying Time (20 °C): Drying: 2 hours,
Thinning Ratio: 30-40% (with water)
Consumption: Approx. 150 - 250 gr/m² on the surface
Application 1
There should be no loose particles on the application surfaces. All oil, grease, rust, dust and paraffin residues must be removed from the surface.
Application 2
Depending on the desired fluidity, it is diluted with 30 - 40% water and mixed with a low speed mixer for about 4 - 5 minutes, after obtaining a homogeneous and lump-free mixture, it is applied as a single coat on the prepared surface with an exterior roller. The product should be mixed at certain intervals during application.
Storage Conditions
It can be stored in its original packaging at 5 - 35 °C away from direct sunlight. Protect from extreme temperature, humidity and frost.
Important Warnings
The primer must never be discharged into sewers and water channels. Application should be carried out as described above.
Prev Page
