Packaging Type
2.5 lt, 7.5 It and 20 kg.
Description
Acrylic copolymer binder based, silicone, matt, interior paint.
Color
44 cardboard colors.
Places of Use
It can be safely used for decorative and protective purposes on all kinds of interior surfaces such as plaster, plaster, concrete and eternit.
Properties
It is a water-based, silicone-added, wipeable, environmentally harmless, odorless, decorative, matt interior paint with high covering power and breathability.
Technical Specifications
- Binder Type: Acrylic copolymer
- Viscosity (KU) (25 °C): 134±3
- Density (g/ml) (20 °C): 1.46± 0.03
- Solids (wt) (%): 59± 2
- Application Thickness: Max. 0.4 mm
- Gloss (85° -Gloss): 7±3 / pH: 8.00-9.00
- Coating Capacity (Theoretical): 13 m²/lt; 9 m²/kg (30µ dry film thickness)
- Coating Capacity (Practical): 0.075-0.090 lt/m² (single coat), 0.110-0.130 kg/m² (single coat)
- Recommended number of floors: Two coats
- Drying Time (20 °C): Drying: 2-3 hours, Complete Drying: 24 hours
- Thinning Ratio : 25-30% (by volume with water)
Application 1
The surfaces to be applied must be sound, dry and clean. Dirty, dusty, blistered and old painted surfaces should be scraped clean and surface defects should be corrected with Interior Putty and primed with Insulation Primer. Make sure that the surface and ambient temperature is between 5-35 °C during application.
Application 2
2-3 hours after the primer application, Polipaint Matte Silicone Interior Paint is thinned with 25-30% water (by volume) and applied to the surface in two coats with a brush or roller. Wait 2 - 3 hours between coats
Storage Conditions
It can be stored in its original packaging in 5-35 °C environments away from direct sunlight. Protected from extreme temperature, humidity and frost
Important Warnings
The primer must be thoroughly mixed before use. Ambient temperature should be between 5-35 °C during application. After each application; brush or roller should be cleaned with water. Surfaces on which Polipaint Silicone Interior / Exterior Primer is applied should be protected from physical and chemical factors for 24 hours. The primer should never be discharged into sewage and water channels. Application should be done as stated above.
Prev Page
